 Designed to excel in waste
recycling and transfer station
operations, the Builtrite Model
2100 takes material handling
to the next level literally.
Unlike
wheeled loaders which can
only push and lift material,
Builtrite Handlers allow
operators to reach below
grade for better trailer topping
and tamping. Often considered
the flagship of the Builtrite
line, every Model 2100 is built
for the long haul with a host of
standard features including
those shown at right.
Some of the biggest names in
waste handling and recycling
have already chosen Builtrite
Handlers particularly the Model
2100 as their equipment of
choice.
Lift Capacity (Less Attachment)
22,300 Lbs @ 10’ Radius
13,900 Lbs @ 15’ Radius
9,600 Lbs @ 20’ Radius
6,300 Lbs @ 25’ Radius
5,000 Lbs @ Full Reach
Boom Data (30’0” Boom)
Reach-Horizontal 30’0”
Fabricated design, high yield steel construction
3” Boom and 2-1/2” cylinder pins with Magnesium Bronze bushings at all pivot points
Boom Cylinders
Two (2) 6” x 36” x 3” rod-Main boom cylinders
One (1) 7” x 36” x 3-1/2” rod-Jib boom cylinder
Double-acting heavy wall, honed steel tubing, with cushioned stops
Cylinders have wear rings on pistons and glands
Heat treated cylinder rods with heavy chrome plating
Accumulators on main lift cylinders to cushion shock loading
Swing System
Continuous Rotation on a 38” diameter turntable bearing
Powered by two swing motors with planetary swing drives
Control Deck
Central control console with instrumentation and start/stop controls
Foot operated swing control
Power Source
One (1) 75 HP 440 Volt 3Ph T.E.F.C. electric motor
Electric Package
Starter phase sequence, control accessories group, breaker in Nema 4 enclosure, start/stop button on control console
Enclosed 4 circuit electric collector (when required)
Pedestal Base
33” high pedestal base with inspection porthole.
Hydraulic System
150 Gallon Hydraulic reservoir with suction and return filters, stack type control valves with main relief and safety port relief for each function
One triple gear pump.
Hydraulic oil cooler (1HP fan motor)
Shutoff valves, heavy wall tubing and multiwire hose throughout system
2000 PSI operating system
Operators Cab
40” x 60” fully insulated, forward sloping equipped with a fold-away door, sliding window, tinted windshield,
wiper/washer, defroster, dome light, and deluxe bucket seat.
Miscellaneous
Hydraulic tank filled
Unit greased and tested prior to shipment
Manual Centralized Grease System
Options/Accessories
Remote Operator Controls and Remote Power Unit Options
Special Grapples
Cab and Boom Lights
Audio/Visual warning system
Wristing Boom
Air conditioning
Cab heater-12 Volt
Automatic Centralized Grease System
Rectifier Package for Magnet
Auxiliary Pass Electrical Collector
Non-continuous rotation with mechanical stops
Boom lengths from 24’4” to 30’”
|
|
Products 
Print Ready Brochure: model-2100-material-handler
